HLG Scorpion Diablo

HLG Scorpion Diablo is designed for grows with low ceiling heights or for vertical racks.  HLG Scorpion Diablo uses 6x QB648 Diablo Quantum Boards® for an even light spread at just 12" from the canopy.  This is a very efficient full spectrum horticulture lamp with an efficiency of 2.9 PPF/W

  • Designed for low ceiling heights or vertical racks
  • Highest efficiency full spectrum grow lamp
     
  • Full Spectrum White and 660nm Red
  • Reliable passive-cooled design
  • Better canopy light penetration with diffused light
  • Dimmable power supply included
  • Auto sensing Inventronics power supply works on both 120VAC and 240VAC and 277VAC
  • 3 Year warranty

SPECIFICATIONS

Power 60-650 Watts
Voltage Range 100-277 VAC 50-60Hz
LED Samsung LM301H & Deep Red
Flowering Footprint 5' x 5' at 18"
Veg Footprint 6' x 6' at 24”
System PPF Efficacy 2.9 μmol/joule
Total output 1900 PPF
Dimensions 38.5" x 36" x 2.75"
Recommended Mounting Height 12-18 inches above canopy

MOUNTING INSTRUCTIONS
THE SCORPION DIABLO IS DESIGNED FOR CHAIN OR SUSPENSION ONLY!
1. Before mounting, make sure the mounting structure can
adequately support a minimum of 32 lbs.
2. Install on a non-combustible surface only
3. Maintain a minimum of 15” from ceiling or hanging structure
*If the fixture is installed closer to the hanging structure than the recommended minimum
height, an active cooling device such as a fan must be in use directly on the unit to reduce
excess heat to the driver. Failure to do so, may result in overheating and thermal overload.
Min 15”

FOR CHAIN OR HOOK SUSPENSION ONLY
CAUTION – RISK OF FIRE

SAFETY INFORMATION
Please read this important safety information before you use the device. It contains general safety information. Follow the warning and caution information to prevent injury to yourself or others and to prevent damage to your device.
EYE EXPOSURE
1. Injury may occur if eyes are subjected to prolonged direct exposure to bright light. Wear approved eye protection for protection from UV rays, and appropriate certifi- cation compliances for LED lighting.
2. Do not use lamps in applications where humans and/or animals will be subjected to direct long-term uncomfortable visual exposure to light emissions as this could result in eye injury. If lamp appears damaged, remove power and then repair or request replacement the product.
BURN WARNING
ELECTRICAL HAZARD
1. Operating lamps may become hot and may involve some risk or causing fire or serious bodily injury or other damages. Use of temperature resistant gloves is recommended.
*Always allow sufficient time for product to cool prior to touching.
1. Electrical shock hazard is always associated with the use of electrical appliances and working with electricity. Do not use if cords or plugs are damaged or with loose electrical sockets. Unsecured connections can cause electrical shock or fire. Do not touch the power cord with wet hands or disconnect from power source by pulling on the cord, as doing so may result in electrical shock. Do not bend or damage the pow- er cord or unit wiring, as doing so may cause electrical shock or fire. User holds sole liability and responsibility for proper use, handling and installation of this product.
2. When performing any troubleshooting please disconnect the AC power and wait 30 seconds for power supply to de-energize. It is also important to follow this step be- fore any inspection, adjustment or maintenance to lamps.

 

Quantity Maximum 2

$2,450.00